Injection-moulded wedge for securing rolls and cylindrical loads.
Industrial plastic wedges designed to stop cylindrical goods from sliding during packing, palletizing, storage and transport. Available in PESL’s three-model range: M01, E2 and B1 Model 2025.
Designed to stabilize cylindrical products on pallets and reduce uncontrolled movement.
M01 injection wedge, E2 coextruded wedge and B1 Model 2025.
For specific needs, PESL can design and develop new wedge models.
Improve pallet stability without redesigning the full packaging system.
The wedge should be selected by product diameter, load weight, pallet layout, route, fixing method and whether standard or custom length is required.
Coextruded wedge using recycled PVC + PU, standard length or custom-made.
Current PESL model for packaging applications requiring the latest wedge design.
Wide range of colours available for identification or customer preference.
A strong RFQ combines geometry, material, use conditions, current issue and expected volume.
| Specification | Why it matters | What PESL needs |
|---|---|---|
|
Wedge model |
Different models suit different load and handling needs. |
M01, E2, B1 2025 or custom. |
|
Product diameter |
Defines wedge contact and stability. |
Weight per roll and pallet. |
|
Load weight |
Determines resistance and quantity required. |
Weight per roll/pallet |
|
Pallet size and roll layout. |
Affects wedge position and fixing method. |
Pallet size and stacking |
|
Transport route |
Domestic/export and handling risk affect selection. |
Route and storage conditions. |
|
Colour / identification |
May support customer packaging logic. |
Colour requirement if needed. |
Plastic roll wedges help secure coils, film rolls, profiles and tubes on pallets, reducing movement and improving load stability during handling, storage and transport.
Wedges for stabilizing coils during palletizing and transport.
Support for rollstock packaging and shipment.
Stabilization of rounded or unstable profiles.
Packaging support for tubes and cylindrical goods.
Wedges for packaging mandrels or cores.
New wedge development for special products.
The wedge is a small packaging part, but it can prevent the big problem: a cylindrical load moving during transport.
The right question is not only “what does the part cost?” It is “what does this part protect, stabilize, separate or enable?”
Each page guides the customer toward a complete technical brief instead of a vague price request.
The more complete the brief, the faster PESL can recommend the right product route.
Send one current reference and PESL can review the most suitable product route, technical feasibility and quotation basis.
Send a pallet photo, roll/coil diameter, weight per unit and where the load currently moves.